Ion transport and limited currents in supporting electrolytes and ionic liquids
Scientific Reports volume 12, Article number: 6215 (2022) Cite this article
2042 Accesses
1 Citations
3 Altmetric
Metrics details
Supporting electrolytes contain inert dissolved salts to increase the conductivity, to change microenvironments near the electrodes and to assist in electrochemical reactions. This combined experimental and computational study examines the impact of supporting salts on the ion transport and related limited currents in electrochemical cells. A physical model that describes the multi-ion transport in liquid electrolytes and the resulting concentration gradients is presented. This model and its parameterization are evaluated by the measured limited current of the copper deposition in a CuSO4 electrolyte under a gradually increasing amount of Na2SO4 that acts as a supporting salt. A computational sensibility analysis of the transport model reveals that the shared conductance between the ions lowers the limited currents with larger supporting salt concentrations. When the supporting salt supplies most of the conductance, the electric-field-driven transport of the electrochemically active ions becomes negligible so that the limited current drops to the diffusion-limited current that is described by Fick's first law. The transition from diluted supporting electrolyte to the case of ionic liquids is elucidated with the transport model, highlighting the different physical transport mechanisms in a non-conducting (polar) and a conducting (ionic) solvent.
Supporting electrolytes are solvent-based liquids that contain inert salt additives (defined as supporting salts) which are not electrochemically converted. These additive salts can increase the conductivity of the electrolyte and thereby improve the efficiency of electrochemical processes1,2,3. For example, in industrial copper refining and winning the conductivity of aqueous CuSO4 baths is increased by H2SO4 addition4,5. Electrolytes with at least three different sorts of ions also emerge when reactive ion types are dissolved with inert ions in for instance aqueous salt solutions6,7,8, molten salts9,10,11, deep eutectic solvents12,13, or ionic liquids14,15,16,17.
For binary (one type of cation and one type of anion) solvent-based electrolytes the transport of ions was experimentally characterized and theoretically described in various works18,19,20. In these systems, the electrolyte is thinning out at the electrode at which dissolved ions are electrochemically converted, whereas the ions accumulate at the electrode which introduces ions into the electrolyte. Thus, electrochemical reactions cause concentration gradients in liquid electrolytes21,22,23 that ultimately limit the current that electric-field and diffusion-driven ion transport can carry without locally depleting the concentration of the converted ion types24. The limited currents and concentration gradients in multi-ion systems with its relation to the microenvironment at the electrode (such as pH25,26) display an important design aspect for electrochemical devices for batteries21,22,23, the separation of ions27,28, CO2 reduction29,30, electrowinning31,32, electroplating33,34,35 and so forth.
In binary electrolytic solutions, the electrolyte parameterization is described by the transfer numbers (that describe the different contributions of the anions and cations to the conduction), the mutual diffusion coefficient (pairwise diffusion of anions and cations under the boundary condition of electro-neutrality in the solution) and the molar conductivity. These properties depend on the concentration, for which the electrochemically driven concentration gradients require a spatially resolved parameterization for a precise transport modeling24. Numerical time domain modeling of the electrochemical transport differential equations has proven its reliability to represent the concentration dependence of the electrolyte parameterization, while it also can resolve changing boundary conditions such as varying currents24.
The ion transport in supporting electrolytes was modeled in previous studies with analytical36,37,38 and numerical39,40,41 approaches to solve the electrochemical transport equations. From these studies, only Awakura et al.37 compared model results with experimental data, which is however crucial to understand and describe the complexity of the ion–ion interactions in these systems that cannot be precisely described by ab-initio models. All of these studies were conducted with a constant set of electrolyte parameters that do not take into account the concentration dependence and ion–ion interactions. Most of these studies considered an infinite distance of anode and cathode37,38,39,41, which simplifies the mathematical description and analytical solution of the transport equations. This scenario however does not lead to a steady state with a constant limited current24. A detailed understanding of the mechanisms that influence limited current in supported electrolytes, its correlation to the electrolyte properties and the parameterization of the interaction of different sort of ions is not yet reported.
The aim of this study is to describe the ion transport in supporting electrolytes with a physical model of the electrochemical transport equations which enables a concentration-dependent parameterization and the description of steady limited currents. The modeled limited currents are compared under different parameterization scenarios to measured limited currents of mixed CuSO4 and Na2SO4 electrolytes. To understand the physicochemical mechanisms of the ion transport in supported electrolytes and its influence on the limited current in detail, a computationally sensibility analysis of the parameterization is conducted. Moreover, the computer model is adjusted to multi-ion systems in molten salts and ionic liquids, showing similarities and differences of the ion transport in comparison to the solvent-based electrolytes. The source codes of the computational model are provided in the supporting information, so that the community effortlessly can reproduce the presented results and thereon further develop the presented model.
In this study, the copper deposition and dissolution of plane and polished copper electrodes in mixed CuSO4 and Na2SO4 electrolytes serve as an exemplary system of supporting electrolytes to examine limited currents. Hereto, the two polished copper plates are separated by a stamped fluoroelastomer flat sealing with an inner diameter of 14 mm and a thickness of 500 µm (Reichelt Chemietechnik). To assemble the cell, the sealing was laid on one electrode and the copper surface was wetted with approximately 1 ml of electrolyte. The surface of the other electrode was also wetted with the electrolyte and then pressed onto the electrode with the sealing. Thereby, the excess electrolyte floated out of the cell assembly while the sealing between the electrodes was completely filled with the electrolyte. The anode was placed at the bottom to avoid macroscopic density differences that are compensated by gravitational shear forces24. An additional cell with copper electrodes and an electrode distance of 20 mm was used to characterize the conductivity of Na2SO4 solutions. Hereto, the copper electrodes were pressed with flat sealings (same type as above) on a polypropylene body. With 4-wire potentiodynamic alternating current impedance measurements, the electrolyte resistance was determined42.
A detailed model on the ion transport in binary electrolytes has been presented previously24, which included an experimental evaluation and a concentration-dependent parameterization of the molar conductivity, mutual diffusion coefficient and ion transfer numbers. This transport model describes the electric field and diffusion driven motion of dissolved ions in liquid electrolytes and is in the following adapted to an electrolyte with three ion types. This multi-ion system is in the following parameterized on the basis of reported experimental conductivities, diffusion coefficients and transfer numbers on the binary electrolyte systems of CuSO4 and Na2SO4, respectively. The source codes of this approach are supplied in the supporting information.
Figure 1 summarizes the data on molar conductivity, diffusion coefficient and cation transfer number of aqueous CuSO4 and Na2SO4 electrolyte solutions, respectively, referring to the data reported by Owen et al.43, Bester-Roag et al.44, Emanuel et al.45, Noulty et al.46, Woolf et al.47, Rard et al.48, Pikal et al.49 and Longsworth et al.50. The molar conductivity and diffusion coefficients decrease towards higher electrolyte concentrations, which is a direct result of the ion–ion interaction that is described by the Debye-Hückel theory51,52. Most of the literature reported values at the standard temperature of 25 °C, whereas the measurements in this study were performed at 20 °C. The effect of temperature on the molar conductivity and diffusion coefficient is discussed elsewhere in detail24. The conductivity and the transfer coefficient of the CuSO4 electrolyte show a more distinct concentration dependence than those of the Na2SO4 electrolyte. The dissolution of CuSO4 acidifies the aqueous solvent, however, the concentration of protons is more than 1000 smaller than the concentration of dissolved copper for which the impact on protons on the transport model is negligible24. The trends of the concentration dependence of the electrolyte properties can be described on the basis of the Debye–Hückel theory, whereas the complexity of the aqueous solutions do not allow a precise theoretical prediction of ion–ion interactions and their impact on conductivities and diffusion coefficients53,54. Thus, the experimental data is described by analytical non-physical equations which adequately describe the concentration dependence of the literature data in Fig. 1 as discussed in the supporting information in detail.
Parameterization of CuSO4 (left) and Na2SO4 (right) binary electrolytes as a function of the concentration. (A) Molar conductivity. (B) Diffusion coefficient. (C) Transfer number.
The transfer number \({t}^{i}\) of the ion type \(i\) is defined by the current \({I}^{i}\) that it carries in relation to the total current \({I}_{\text{tot}}\):
Using Ohm's law, this equation can also be interpreted as a ratio of conductivities \(\kappa\):
To apply this definition to multi-ion systems, a more precise notation is introduced in the following. In Na2SO4, the anion (\({\text{SO}}_{4}^{2-}\)) has a valence of two whereas the cation (\({\text{Na}}^{+}\)) has a valence of one. By using the lowest common denominator of the valences, equal charges and equal concentrations of the definitions of \(C=2{\text{Na}}^{+}\) and \(A={\text{SO}}_{4}^{2-}\) result. The molar conductivity \(\Lambda\) of an binary electrolyte that is comprised by type A and C is here defined as \({\Lambda }^{\text{AC}}\) (units of \(\text{S c}\, {{\text{m}}^{2}} \,\text{ mol}^{-1}\)). As shown in Fig. 1, the transfer number and the molar conductivity have an intrinsic concentration dependence for which both are a function of the concentration \({c}^{\text{AC}}\). The conductivity of the binary electrolyte \({\kappa }^{\text{AC}}\) equals the product of concentration and molar conductivity:
With the molar conductivity and the ion transport number, the conductivity \({\upkappa }^{\text{A}}\) of the anion \(A\) as a function of the concentration can be calculated as
In the considered multi-ion system of CuSO4 with Na2SO4 addition, the conductivity of the sodium and copper ions are determined similarly to the binary solutions
where \(\widehat{\Lambda }\) includes the influence by the interactions between the different ion types on the molar conductivity. In the case of the sulfate anion, the situation becomes more complex, as it is involved in the conduction of both salts. Its conductivity is here calculated as the sum of its contributions to the conductivity of both dissolved salts:
In the results part, different approaches to estimate the influence of the ion interactions on the molar conductivity are presented, which are based on the data in Fig. 1. The total conductivity \({\kappa }_{\text{tot}}\) in the multi-ion system equals the sum of the conductivities of the individual types of ions. Accordingly, the conductivity ratio (Eq. (2)) can be determined for multi-ion systems, which expressed the share of the different ion types to the overall current.
The diffusion process of type A and C is always pairwise, as otherwise the electroneutrality is violated. Thus, the mutual diffusion coefficients \(D\) are used to calculate those of the cations:
For the sulfate ions, the weighted arithmetic mean is used to calculate the diffusion coefficient, as their diffusion also depends on the mobility of the cations to which they are paired:
The differential equations of the transport model are discussed in the supporting information in detail, including their boundary conditions at the electrodes and their implementation in the numerical simulation framework.
First, the experimental and model data on the ionic transport of mixed CuSO4 and Na2SO4 electrolytes is presented. Second, the influence of the electrolyte parameters on limited currents is examined using the transport model. Moreover, the computer model is used to describe the transition from diluted polar solvents to ionic liquids, highlighting similarities and differences of both systems.
Figure 2 shows the measured current densities of a 0.1 M CuSO4 solution with a variation of Na2SO4 addition from 0 to 1 M as a function of time. A voltage of 0.3 V was applied between the electrodes that were 500 µm apart from each other (see "Experimental" section). After initial double layer charging and surface reduction/oxidation the current can be mainly attributed to the copper deposition and dissolution. This electrochemical current decays over time as the cathodic copper ion concentration depletes (detailed discussion below). After approximately 200 s a steady current is reached for all different concentrations.
Measured current densities at 0.3 V between two copper electrodes (distance of 500 µm) with a CuSO4 concentration of 0.1 M and a variation of the Na2SO4 concentration from 0 to 1 M.
To calculate the limited currents with the computational transport model, the simulation is started with a current density of 15 mA/cm2, resembling the experimental approach by beginning with a larger value than the expected limited current density. When the concentration of copper ions at the cathode depletes to 1/15 of the initial concentration of 0.1 M, the current is decreased. After this initial reduction, the current is continuously adjusted so that the cathodic copper ion concentration is ranging between 1/15 and 1/12 of the initial concentration. Figure 3 shows an example of the modeled concentration gradients between the electrodes for a total CuSO4 concentration of 0.1 M and a Na2SO4 concentration of 0.2 M. In the initial state, the concentration of the ions is evenly distributed in the electrolytic solution. In the final state, a steady limited current is reached, in which the concentration gradients do not change as a function of time and in which the copper ion concentration at the cathode is depleted. The total concentrations of the ions in the electrolyte do not change, as the inert ions are not converted at the electrodes and as the same amount of copper is deposited and dissolved. Moreover, the sum of the charges of the cations and anions is locally and globally zero, fulfilling the electroneutrality of the electrolyte (see detailed discussion in reference24).
Modeled concentration gradients (using the parameterization case iv as defined in the text below) at the limited current for an electrode distance of 500 µm, a CuSO4 concentration of 0.1 M, and a Na2SO4 concentration of 0.2 M. The cathode is located at the left side (distance = 0) and the anode at the right side (distance = 500 µm).
In contrast to the copper ion starvation at the cathode and its accumulation at the anode, the sodium ion concentration gradient is converse, with an enlarged amount at the cathode and a reduced amount at the anode. The sodium ions are transported by the electric field in the electrolyte to the cathode where they cannot be converted. In the steady state, the sodium ion current by the electric field towards the cathode is balanced by diffusion into the opposite transition, leading to no net sodium ion transport. As the sulfate ions are transported by the electric field towards the anode, the amount of sulfate ions is decreased at the cathode and increased at the anode. As the sulfate ions are the only anions in this system, their amount reflects the total amount of dissolved ions with respect to the charge. Similar to the sodium ions, in the steady state the net sulfate ion transport equals zero so that the copper ions as the only electrochemical active ion type constitute the total net current. The electric-field and diffusion-driven ion transport of the copper ions point in the same direction from the anode to the cathode.
From the measurements graphed in Fig. 2, the limited current was determined by the mean current between 300 and 400 s after the experiments started. In addition to the data graphed in Fig. 2, two repetition measurements were conducted. Figure 4 shows the mean of these measurements with the standard variation as the statistic error of the experiments. Moreover, Fig. 4 shows the modeled data, which is considered for four different approaches of the parameterization, which all show similar trends as the experiment with decreasing limited currents towards higher Na2SO4 concentrations. The four different parameterizations are characterized by the following features:
The first case is modeled with a constant parameterization, resembling previously reported models in the literature36,37,38,39,40,41. The values of Fig. 1 at 0.1 M concentration of CuSO4 and Na2SO4 serve as model input parameters. When the concentration of copper ions near the cathode is thinning out, their local conductivity, diffusion coefficient and transfer number increase with reference to Fig. 1 which increases the limited current in pure CuSO4 electrolytes24. By neglecting these concentration dependencies, the current is up to a Na2SO4 concentration of 0.5 M underestimated (similar to that in binary solutions24), as the locally higher diffusivity and ion transport number (see Fig. 1) of the copper ions at the depleting cathodic concentration is not taken into account. At higher Na2SO4 concentrations, the decrease of the conductivity, diffusion coefficients and cation transfer number becomes significant so that the model with the constant parameterization overestimates the limited current.
In the second case, the model is parameterized with the individual concentration dependencies of CuSO4 and Na2SO4 respectively, without taking their interaction into account. Thus, the molar conductivity, diffusivity and cation transport number of the CuSO4 component decreases towards higher CuSO4 concentrations, whereas it is not affected by the Na2SO4 concentration. Likewise, the properties of the Na2SO4 component are influenced by its concentration and do not interact with the CuSO4 component. The modeled data is overestimating the measured limited current. At Na2SO4 concentrations below 0.05 M the differences between the modeled and measured data is with less than 5% moderate, however, it increases towards higher concentrations. As expected from the Debye–Hückel theory, the interaction of the ions is expected to decrease the molar conductivity and diffusion coefficients, explaining the modeled overestimation of the limited currents.
In the third parametrization scenario, the parameters of the CuSO4 and Na2SO4 components are calculated as a function of the total concentration of sulfate ions, assuming that the interaction between the sulfate ions and the different cations is equal. However, this parametrization underestimates the measured limited current. Thus, the assumption that the ions influence one another in the same amount does not hold valid. Figure 1 showed a more pronounced concentration dependence of molar conductivity, diffusion coefficient and transfer number of CuSO4 than those of Na2SO4. Thus, the ion–ion interactions in CuSO4 are different from that in Na2SO4 and the influence of the different components on one another is therefore also not that easy to describe.
The fourth case describes a concentration-dependent parameterization that displays a mixture between the second and third approach. Hereto, the parameters for the CuSO4 component are calculated for the concentration of CuSO4 plus 20% of the concentration of Na2SO4. Analogously, the parameters for the Na2SO4 component are calculated for the concentration of Na2SO4 plus 20% of the concentration of CuSO4. Thus, an interaction between the different ion types is partly included, however, to a smaller extent than that between the ions of the same type. Using this parameterization, a good fit of modeled and measured data is obtained.
Measured (black lines with scatter and error bars) and modeled (colored lines) limited currents densities for a CuSO4 concentration of 0.1 M under a variation of the Na2SO4 concentration. The four different parameterization scenarios for the model are discussed in the text. The measured data is recorded with a voltage of 0.3 V between the electrodes. (A) Linear increment of the x-axis. (B) Square root spacing of the x-axis to more clearly resolve the limited current densities at small concentrations.
The scenarios discussed above are based on the experimental data on binary electrolytes and do not represent a physicochemical approach to characterize the ion–ion interactions in mixed ion systems. Based on these data, however, the ion–ion interaction is shown to crucially impact the ion transport in supporting electrolytes and the related limited currents. In the literature53, the Debye–Hückel theory based physicochemical models that are used to describe the complex interaction between the ions are non-trivial and typically do not exactly describe the concentration dependence of the electrolyte parameters. However, using such approaches a physicochemical description of the ion–ion interactions for the electrolyte parameterization may be possible. Theoretical works to address the prediction of the ion–ion interaction in multi-ion systems have to follow and may lead to more precise parameterization procedures as the presented approaches that is based on the experimental data of binary electrolytic solutions.
Thus far, measured and modeled data showed that limited currents decrease towards higher concentrations of the inert ions. In the following, the modeled limited currents are modeled under a variation of the electrolyte parameters, aiming to display the physicochemical relations that are described by the differential equations of the transport model. Hereto, two cases are considered, a polar solvent in which the salts are dissolved and an ionic liquid (or ionic melt). The first case resembles the above discussed CuSO4–Na2SO4 system, where water displayed the polar solvent.
A simplified test system is considered in the following, in order to focus on the physicochemical interactions of the transport mechanisms rather than the complex parameterization that is discussed above. The test system is characterized by the following properties: (1) The electrolyte is comprised by two different salts, with two different types of cations (denoted as C1 and C2) and one type of anion (denoted as A). (2) Cation type C1 is pushed at the anode into the electrolyte and it is removed at the cathode, the other ions are inert. (3) Both salts have an equal density. (4) The molar conductivity, diffusion coefficient and transfer number of both salts are assumed as concentration independent with constant values of \(\Lambda = 100 \,\text{ S }{\text{cm}}^{2} {\text{mol}}^{-1}\), \(D={10}^{-5}\, {\text{cm}}^{2} {\text{s}}^{-1}\), \({t}^{+}=0.5\) and initial concentrations of \(c=0.1\,\text{ M}\). One of these parameters of the supporting salt (that is constituted of C2 and A) are varied, while the other remain constant.
Figure 3 showed, that the net concentration of all ions at the cathode in the system decreases near the cathode. However, in the case of ionic liquids or salt melts, the depletion of the ions at an electrode means that the entire electrolyte vanishes whereas it concentrates at another electrode. For the test system with the ionic liquid an encapsulated volume is considered (such as in a battery). As both salts in the test system have the same type of anions and the same density, only the positions of the cations can change whereas the concentration of the anions is constant over the entire electrolyte. Hence, the differential equations that describe the anion transport are neglected and deleted from the source code.
Figure 5A shows the modeled concentration gradients of the test system with a polar solvent. Despite the different parameterization, a similar shape of the concentration gradients compared to Fig. 3 is obtained. Figure 5B graphs the limited currents that are obtained under the parameter variation of the electrolyte with the polar solvent. With a negligible concentration or conductivity of the inert cations C2, the same limited current as in the case of the unsupported electrolyte is reached. With an increasing concentration or conductivity the limited current drops to the value described by Fick's first law, in which diffusion is the only driving force. Thus, in this case the conduction of C1 has a minor impact on its net transport. Without the supporting salt, the limited current is approximately 2 times higher than that described by Fick's first law. In the case of a variation factor of unity (equal properties of inert and active salt), the limited current is 1.25 higher than the diffusion-limited current.
Modeled data to examine the influence of the electrolyte parameters on the limited current for an electrode distance of \(0.1\, \text{cm}\), an initial concentration of \(c=0.1\, \text{M}\), a molar conductivity \(\Lambda =100\, \text{S}\, {\text{cm}}^{2}\, {\text{mol}}^{-1}\) and a diffusion coefficient of \(D={10}^{-6}\, {\text{cm}}^{2}\,{\text{s}}^{-1}\) of the supporting salt and the reactive ion pair. (A) Concentration gradients obtained for the polar solvent. (B) Parameter variation for the polar solvent. The variation factor on the x-axis is multiplied to either the concentration, molar conductivity or diffusion coefficient of the supporting salt. Blue lines: Diffusion-limited current calculated by Fick's first law and the limited current without addition of supporting salt. (C,D) Same as (A) and (B) but for an ionic liquid, where the ion displacement is confined as described in the text in more detail.
In binary diluted electrolytes the conductivity does not influence the limited current, as the entire current is anyway carried by the ions24. However, as here defined by the conductivity ratio (Eq. 2), now the conductivity is decisive as it determines how much of the active ions C1 are actually carried by the conduction. The conductivity is shared between the different types of ions. When the conductivity of the inert ion C2 type becomes much larger than that of the active ion C1, the ion C1 is mainly transported by the driving force of the concentration gradient as the conduction is mainly done by C2. The limited current increases towards higher values of the diffusion coefficient of the inert salt. In this case, a depletion of ions at the cathode is avoided, from which also the limited current benefits.
Figure 5C shows the concentration gradient modeled for an ionic liquid. In this case, the amount of anions is constant over the distance (see discussion above). Figure 5D shows the modeled limited currents for the ionic liquid scenario. Without the supporting salt, the limited current is infinite as the boundary condition of the constant anion concentration does not allow a concentration gradient. With small additions of the supporting electrolyte, the supporting salt accumulates at the cathode and high concentration gradients of C1 over small distance close to the cathode result, for which the limited currents are orders of magnitude higher than those in the case of the polar solvent. Towards infinite concentrations or conductivities of C2, the limited current drops to the diffusion-limited current described by Fick's first law (see reference24).
The results on the copper based model system can find direct application in the design of electrochemical processes and devices such as copper refining4,5 or aqueous copper/sulfur batteries55,56. However, the aim of this article is to conclude physicochemical relations that are applicable to a wider scope and which are independent of the parameterization of the presented model system. With the knowledge that the limited current decreases with the amount of supporting ions, the addition of inert ions displays a compromise between an increased conductivity and a decreased limited current. When the electrolyte is mechanically mixed by convectional forces, the concentration gradients formed by the electrochemical current are partly equilibrated. Thus, the diffusion-limited currents in such flowing electrolytes is larger than in the case of static electrolytes. Causes for such convection can be found in: (i) Macroscopic density difference, where the gravitational force leads to shear forces. (ii) Bubble formation and ascending bubbles. (iii) Mechanical mixing of the electrolyte by stirring or pumping.
In ionic liquids, the electrode is always in contact with the electrolyte, which reduces with reference to Fig. 5 the depletion of the active ion type at the electrode in comparison to solvent based electrolytes. However, high viscosities typically cause smaller diffusion coefficients and conductivities of the active ion types in ionic liquids than that those of solvent based electrolytes. As a result, limited currents can display a severe limitation for electrochemical devices and processes that operate with ionic liquids. Further studies have to follow to experimentally examine limited currents in ionic liquids.
This study examined the ion conduction, current-driven concentration gradients and related limited currents in supporting electrolytes. A computational model is developed to describe the ion transport and the related spatiotemporal ion concentrations in electrolytes with three ion types. This model is equipped with different concentration-dependent parameterization scenarios and evaluated with measured limited currents of CuSO4–Na2SO4 electrolytes. The comparison of measured and modeled data shows that a complex concentration-dependent parameterization of the interaction between the different ion types in supporting electrolytes is required to adequately model the ion transport. A computational study on the variation of the electrolyte parameters reveals the ion transport mechanisms and the interplay of electric-field and diffusion-driven ion motion. With an infinite amount of supporting salt in the electrolyte, the conduction-driven transport of the active ion becomes negligible and the limited current drops to the diffusion-limited current that is described by Fick's first law. The similarities and differences of the ion transport in supporting electrolytes and ionic liquids is examined with the computational model, showing the impact of electrolyte parameters on limited currents.
All data of the computational model generated or analysed during this study are included in this published article and its supporting information as it can be calculated and reproduced with the provided source code. The experimental datasets used and/or analysed during the current study are available from the corresponding author on reasonable request.
Colvin, E. W. The effect of supporting electrolyte on the electrochemical synthesis, morphology, and conductivity of polyaniline. Silicon Org. Synth. 111, 15–20 (1981).
Article Google Scholar
Oldham, K. B. Theory of steady-state voltammetry without supporting electrolyte. J. Electroanal. Chem. 337, 91–126 (1992).
Article CAS Google Scholar
Selman, J. R. & Newman, J. Free-convection mass transfer with a supporting electrolyte. J. Electrochem. Soc. 118, 1070–1078 (1971).
Article CAS ADS Google Scholar
Price, D. C. & Davenport, W. G. Densities, electrical conductivities and viscosities of CuSO4/H2SO4 solutions in the range of modern electrorefining and electrowinning electrolytes. Metall. Trans. B 11, 159–163 (1980).
Article Google Scholar
Ibl, N. Optimization of copper refining. Electrochim. Acta 22, 465–477 (1977).
Article CAS Google Scholar
König, M., Vaes, J., Klemm, E. & Pant, D. Solvents and supporting electrolytes in the electrocatalytic reduction of CO2. iScience 19, 135–160 (2019).
Article ADS CAS PubMed PubMed Central Google Scholar
Daniele, S., Baldo, M. A., Bragato, C., Denuault, G. & Abdelsalam, M. E. Steady-state voltammetry for hydroxide ion oxidation in aqueous solutions in the absence of and with varying concentrations of supporting electrolyte. Anal. Chem. 71, 811–818 (1999).
Article CAS Google Scholar
Brudzisz, A. M., Brzózka, A. & Sulka, G. D. Effect of the supporting electrolyte on chloroform reduction at a silver electrode in aqueous solutions. Molecules 26, 1–11 (2021).
Google Scholar
Yin, H. et al. Capture and electrochemical conversion of CO2 to value-added carbon and oxygen by molten salt electrolysis. Energy Environ. Sci. 6, 1538–1545 (2013).
Article CAS Google Scholar
Al-Juboori, O., Sher, F., Khalid, U., Niazi, M. B. K. & Chen, G. Z. Electrochemical production of sustainable hydrocarbon fuels from CO2Co-electrolysis in eutectic molten melts. ACS Sustain. Chem. Eng. 8, 12877–12890 (2020).
Article CAS Google Scholar
Kruesi, W. H. & Fray, D. J. The electrowinning of lithium from chloride-carbonate melts. Metall. Trans. B 24, 605–615 (1993).
Article Google Scholar
Nkuku, C. A. & LeSuer, R. J. Electrochemistry in deep eutectic solvents. J. Phys. Chem. B 111, 13271–13277 (2007).
Article CAS PubMed Google Scholar
Zhang, Q., De Oliveira Vigier, K., Royer, S. & Jérôme, F. Deep eutectic solvents: Syntheses, properties and applications. Chem. Soc. Rev. 41, 7108–7146 (2012).
Article CAS PubMed Google Scholar
Liu, Q. X., El Abedin, S. Z. & Endres, F. Electroplating of mild steel by aluminium in a first generation ionic liquid: A green alternative to commercial Al-plating in organic solvents. Surf. Coat. Technol. 201, 1352–1356 (2006).
Article CAS Google Scholar
El Abedin, S. Z., Moustafa, E. M., Hempelmann, R., Natter, H. & Endres, F. Additive free electrodeposition of nanocrystalline aluminium in a water and air stable ionic liquid. Electrochem. Commun. 7, 1111–1116 (2005).
Article CAS Google Scholar
Abbott, A. P. & McKenzie, K. J. Application of ionic liquids to the electrodeposition of metals. Phys. Chem. Chem. Phys. 8, 4265–4279 (2006).
Article CAS PubMed Google Scholar
Zhang, G. R. & Etzold, B. J. M. Ionic liquids in electrocatalysis. J. Energy Chem. 25, 199–207 (2016).
Article Google Scholar
Van Soestbergen, M., Biesheuvel, P. M. & Bazant, M. Z. Diffuse-charge effects on the transient response of electrochemical cells. Phys. Rev. E Stat. Nonlinear Soft Matter Phys. 81, 1–13 (2010).
Google Scholar
Zelinsky, A. G. & Pirogov, B. Y. Electrolysis in a closed electrochemical cell with a small inter-electrode distance. Metal dissolution/deposition in plain electrolytes. Electrochim. Acta 54, 6707–6712 (2009).
Article CAS Google Scholar
Danilov, D. & Notten, P. H. L. Mathematical modelling of ionic transport in the electrolyte of Li-ion batteries. Electrochim. Acta 53, 5569–5578 (2008).
Article CAS Google Scholar
Sethurajan, A. K., Krachkovskiy, S. A., Halalay, I. C., Goward, G. R. & Protas, B. Accurate characterization of ion transport properties in binary symmetric electrolytes using in situ NMR imaging and inverse modeling. J. Phys. Chem. B 119, 12238–12248 (2015).
Article CAS PubMed Google Scholar
Klett, M. et al. Quantifying mass transport during polarization in a Li Ion battery electrolyte by in situ 7Li NMR imaging. J. Am. Chem. Soc. 134, 14654–14657 (2012).
Article CAS PubMed Google Scholar
Krachkovskiy, S. A., Pauric, A. D., Halalay, I. C. & Goward, G. R. Slice-selective NMR diffusion measurements: A robust and reliable tool for in situ characterization of ion-transport properties in Lithium-ion battery electrolytes. J. Phys. Chem. Lett. 4, 3940–3944 (2013).
Article CAS Google Scholar
Schalenbach, M. et al. Ionic transport modeling for liquid electrolytes—Experimental evaluation by concentration gradients and limited currents. Electrochem. Sci. Adv. https://doi.org/10.1002/elsa.202100189 (2022).
Article Google Scholar
Zhang, Z. et al. pH matters when reducing CO2 in an electrochemical flow cell. ACS Energy Lett. 5, 3101–3107 (2020).
Article CAS Google Scholar
Lu, X. et al. In situ observation of the pH gradient near the gas diffusion electrode of CO2 reduction in alkaline electrolyte. J. Am. Chem. Soc. 142, 15438–15444 (2020).
Article CAS PubMed Google Scholar
Sun, Y., Wang, Y., Liu, Y. & Xiang, X. Highly efficient lithium extraction from brine with a high sodium content by adsorption-coupled electrochemical technology. ACS Sustain. Chem. Eng. 9, 11022–11031 (2021).
Article CAS Google Scholar
Palagonia, M. S., Brogioli, D. & Mantia, F. L. Influence of hydrodynamics on the lithium recovery efficiency in an electrochemical ion pumping separation process. J. Electrochem. Soc. 164, E586–E595 (2017).
Article CAS Google Scholar
Kaneco, S. et al. High efficiency electrochemical CO2-to-methane conversion method using methanol with lithium supporting electrolytes. Ind. Eng. Chem. Res. 41, 5165–5170 (2002).
Article CAS Google Scholar
Kyriacou, G. Z. & Anagnostopoulos, A. K. Influence of CO2 partial pressure and the supporting electrolyte cation on the product distribution in CO2 electroreduction. J. Appl. Electrochem. 23, 483–486 (1993).
Article CAS Google Scholar
Bozhkov, C., Petrova, M. & Rashkov, S. Nickel and cobalt synergism effect in zinc electrowinning from sulphate electrolytes. J. Appl. Electrochem. 22, 73–81 (1992).
Article CAS Google Scholar
Yu, B. C. et al. Electrochemical behaviour and electrowinning of rhodium in acidic chloride solution. J. Appl. Electrochem. 44, 741–745 (2014).
Article CAS Google Scholar
Xiao, Z. L. et al. Tuning the architecture of mesostructures by electrodeposition. J. Am. Chem. Soc. 126, 2316–2317 (2004).
Article CAS PubMed Google Scholar
Nieszporek, J., Gugała-Fekner, D. & Nieszporek, K. The effect of supporting electrolyte concentration on zinc electrodeposition kinetics from methimazole solutions. Electroanalysis 31, 1141–1149 (2019).
Article CAS Google Scholar
Wang, X., Issaev, N. & Osteryoung, J. G. A novel gold electroplating system: Gold(I)-iodide-thiosulfate. J. Electrochem. Soc. 145, 974–981 (1998).
Article CAS ADS Google Scholar
Hazlebeck, D. A. & Talbot, J. B. Modeling of additive effects on the electroplating of a through-hole. AIChE J. 36, 1145–1155 (1990).
Article CAS Google Scholar
Awakura, Y., Okada, M. & Kondo, Y. Profile of the refractive index in the cathodic diffusion layer of an electrolyte containing CuSO4 and H2SO4. J. Electrochem. Soc. 124, 1050–1057 (1977).
Article CAS ADS Google Scholar
Jaworski, A., Donten, M. & Stojek, Z. Chronoamperometry of uncharged species in the presence of a very low concentration of supporting electrolyte. A simulation. J. Electroanal. Chem. 407, 75–81 (1996).
Article Google Scholar
Hauser, A. K. & Newman, J. Potential and concentration variations of a reacting, supporting electrolyte. J. Electrochem. Soc. 136, 3319–3325 (1989).
Article CAS ADS Google Scholar
van Soestbergen, M. Diffuse layer effects on the current in galvanic cells containing supporting electrolyte. Electrochim. Acta 55, 1848–1854 (2010).
Article CAS Google Scholar
Streeter, I. & Compton, R. G. Numerical simulation of potential step chronoamperometry at low concentrations of supporting electrolyte. J. Phys. Chem. C 112, 13716–13728 (2008).
Article CAS Google Scholar
Schalenbach, M., Lueke, W., Lehnert, W. & Stolten, D. The influence of water channel geometry and proton mobility on the conductivity of Nafion®. Electrochim. Acta 214, 362–369 (2016).
Article CAS Google Scholar
Owen, B. B. & Gurry, R. W. The electrolytic conductivity of zinc sulfate and copper sulfate in water at 25°. J. Am. Chem. Soc. 60, 3074–3078 (1938).
Article CAS Google Scholar
Bešter-Rogač, M. Electrical conductivity of concentrated aqueous solutions of divalent metal sulfates. J. Chem. Eng. Data 53, 1355–1359 (2008).
Article CAS Google Scholar
Emanuel, A. & Olander, D. R. Diffusion coefficients of copper sulfate in water and water in n-butyl alcohol. J. Chem. Eng. Data 8, 31–32 (1963).
Article CAS Google Scholar
Noulty, R. A. & Leaist, D. G. Diffusion in aqueous copper sulfate and copper sulfate-sulfuric acid solutions. J. Solut. Chem. 16, 813–825 (1987).
Article CAS Google Scholar
Woolf, L. A. & Hoveling, A. W. Mutual diffusion coefficients of aqueous copper(II) sulfate solutions at 25°. J. Phys. Chem. 74, 2406–2408 (1970).
Article CAS Google Scholar
Rard, J. A. & Miller, D. G. The mutual diffusion coefficients of Na2S04-H2O and MgSO4-H2O at 25°C from Rayleigh interferometry. J. Solut. Chem. 8, 755–766 (1979).
Article CAS Google Scholar
Pikal, M. J. & Miller, D. G. Hittorf transference numbers in aqueous copper sulfate at 25 °C. J. Chem. Eng. Data 16, 226–229 (1971).
Article Google Scholar
Longsworth, L. G. Transference numbers of aqueous solutions of some electrolytes at 25° by the moving boundary method. J. Am. Chem. Soc. 57, 1185–1191 (1935).
Article CAS Google Scholar
Çetin, M. Electrolytic conductivity, Debye-Hückel theory, and the Onsager limiting law. Phys. Rev. E 55, 2814–2817 (1997).
Article ADS Google Scholar
Ferguson, A. & Vogel, I. On the agreement with experiment of the dilution formula deduced from the Debye-Hückel theory. Trans. Faraday Soc. 23, 404–408 (1927).
Article CAS Google Scholar
Kontogeorgis, G. M., Maribo-Mogensen, B. & Thomsen, K. The Debye-Hückel theory and its importance in modeling electrolyte solutions. Fluid Phase Equilib. 462, 130–152 (2018).
Article CAS Google Scholar
Liu, J. L. & Li, C. L. A generalized Debye-Hückel theory of electrolyte solutions. AIP Adv. 9, 015214 (2019).
Article ADS CAS Google Scholar
Wu, X. et al. A four-electron sulfur electrode hosting a Cu2+/Cu+ redox charge carrier. Angew. Chem. Int. Ed. 58, 12640–12645 (2019).
Article CAS Google Scholar
Wang, Y., Chao, D., Wang, Z., Ni, J. & Li, L. An energetic CuS-Cu battery system based on CuS nanosheet arrays. ACS Nano 15, 5420–5427 (2021).
Article CAS PubMed Google Scholar
Download references
This work was supported by the German Federal Ministry of Education and Research (BMBF) within the Project iNEW (03SF0589A).
Open Access funding enabled and organized by Projekt DEAL.
Fundamental Electrochemistry (IEK‑9), Institute of Energy and Climate Research, Forschungszentrum Jülich GmbH, 52425, Jülich, Germany
Maximilian Schalenbach, Yasin Emre Durmus, Hermann Tempel, Hans Kungl & Rüdiger-A. Eichel
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
M.S. developed the ion transport model, conducted the measurements and wrote the text. M.S., Y.E.D., H.T., H.K. and R.E. prepared and designed the manuscript.
Correspondence to Maximilian Schalenbach.
The authors declare no competing interests.
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article's Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article's Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
Reprints and Permissions
Schalenbach, M., Durmus, Y.E., Tempel, H. et al. Ion transport and limited currents in supporting electrolytes and ionic liquids. Sci Rep 12, 6215 (2022). https://doi.org/10.1038/s41598-022-10183-2
Download citation
Received: 17 February 2022
Accepted: 01 April 2022
Published: 13 April 2022
DOI: https://doi.org/10.1038/s41598-022-10183-2
Anyone you share the following link with will be able to read this content:
Sorry, a shareable link is not currently available for this article.
Provided by the Springer Nature SharedIt content-sharing initiative
By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.